Get updates
In development, in pre-clinical validation

The Timed Up and Go, measured from a smartphone video.

Record the test with a phone and get, within minutes, the time of each phase, gait and balance metrics, and a clinical report ready to review and share.

0.00s
Getting ready
Movement detected in a test recording, with no image of the patient

What it is for

The Timed Up and Go is the most widely used test of mobility and fall risk in older adults. It usually yields a single number: the total time. TUGscope turns the same 20-second recording into a complete gait and balance assessment, with no sensors, no markers and no lab.

Total and per-phase time

Sit-to-stand, walk out, turn, walk back, final turn and sit down, with the start and end of each phase. The stopwatch no longer depends on the examiner's reaction time.

Gait and balance metrics

Cadence, speed, step and stride length, stance and swing, double support, symmetry, regularity, turning strategy, trunk control and use of the hands during transfers.

A report ready to share

A clear PDF with a timeline, tables and a clinical narrative drafted with AI support. The clinician reviews, edits and signs before sharing.

How it works

All you need is a phone on a tripod. The video is analysed on your computer and never leaves it; only the measurements, and optionally a few key frames, are used to prepare the report.

Record the test

With a phone, from the side or the front, from the moment the patient is seated until they sit back down.

1 minute

Load the video

Enter the patient, the walking aid and the course. The application tracks the body's movement and identifies each phase of the test.

On your computer

Get the measurements

Total and per-phase time, cadence, speed, step length, turning, sit-to-stand and sit down, posture and signs of difficulty.

A few minutes

Review and share

The report appears in the application with a clinical narrative proposed by the AI. Correct whatever you see fit and export the PDF.

PDF ready

What it measures

TUGscope tracks the body's movement in every frame of the video and, from there, computes the measurements with reproducible biomechanical methods. Every value in the report states how it was obtained and with what confidence.

Test phases

Sit-to-stand, walk out, turn, walk back, final turn and sit down, with the start, end and duration of each. The total time no longer depends on the reflexes of whoever holds the stopwatch.

Gait

Step count, cadence, speed, step and stride length, stance and swing times, left–right symmetry and regularity.

Turn

Duration, number of steps, direction and smoothness of the turn, with warning signs such as pauses, crossed steps or en-bloc rotation of the body.

Sit-to-stand and sit down

Time of each transfer, number of attempts, use of the hands, trunk lean and control of the descent onto the chair.

Posture and signs of difficulty

Trunk lean and sway, arm swing, foot clearance, corrective steps and reaching for support on walls or furniture.

Recording quality

The application assesses framing, camera stability and detection confidence, and flags when a measurement is not reliable under those conditions.

First results

Total time measured by TUGscope against the examiner's stopwatch, in four test recordings under different conditions. The stopwatch includes the examiner's reaction time.

These figures come from internal development recordings. Formal validation, with a defined protocol and sample, is the project's next step.
Single-camera video: measurements are estimates and should be confirmed by the clinician in the first cases.
Recording conditionsStopwatchTUGscope
Handheld camera, following the patient27.13 s27.32 s
Frontal view, patient partly out of frame24.74 s23.6 s
Diagonal view, recording starts mid sit-to-stand16.11 s15.01 s
Frontal view, static camera13.26 s12.74 s

The application

Three screens, no learning curve: patient details and video, analysis with the detected movement in real time, and results with a timeline, measurements and an editable report. Works offline; AI support is optional.

TUGscope home screen with the video loaded and the patient details filled in
HomePatient details, walking aid, course and video
Analysis screen with the progress bar and the detected skeleton overlaid on the video
AnalysisProgress and detected movement over the video
Results screen with the total time, the phase timeline and the AI analysis
ResultsTimeline, measurements and editable report

The PDF report

A document written to be read by other health professionals. It opens with the total time and the phase timeline, continues with the measurement tables and closes with the clinical narrative.

Measurements, observations and interpretation are always kept apart, so it is clear what was computed, what was seen and what is clinical judgement.

Missing values are declared as not assessed, with the reason: camera angle, no scale reference or too few steps.

A limitations section closes every report: video quality, camera stability, detection confidence.

Editable before export. The AI text is a proposal; the clinician signs what goes out.

See a real report (PDF, in Portuguese)

Report of the test shown in the video, exactly as exported from the application: 6 pages, 330 KB, in Portuguese. Published with the participant's consent; identifying details are anonymised.

TUGscope
Timed Up and Go test reportexemplo.mov · generated on 2026-10-28
12.7s
Total TUG time, from the start of movement until the hips settle on the chair
Sit-to-stand 0.5 s Walk out 3.9 s Turn 3.0 s Walk back 2.6 s Final turn 1.9 s Sit down 1.1 s
PatientSample patient
Age78
Walking aidnone
Course3.0 m
Camerastatic
Camera viewdiagonal
Metric calibrationunavailable
Subject detection100% of frames
Seated · 1.7 s
Sit-to-stand · 2.2 s
Walk out · 4.4 s
Turn · 7.9 s
Walk back · 10.7 s
Sit down · 14.2 s

Gait

MetricWalk outWalk back
Steps54
Cadence109.7 steps/min131.5 steps/min
Speed0.77 m/s < 0.81.17 m/s
Step length0.42 m0.53 m
Regularity: step-time CV6.3 %35.9 %

Turn

Duration3.02 sPauses0
Steps4En-bloc rotationno
Overall result. The total time of 12.74 s sits at the borderline of the cut-offs usually cited for higher fall risk in community-dwelling older adults (12 to 13.5 s) and does not, on its own, allow the risk to be classified. Walk-out speed (0.77 m/s) is below the 0.8 m/s reference threshold…
Continues: sit-to-stand and sit down, posture, signs of difficulty, interpretation, recommendations and limitations

With artificial intelligence support

The AI measures nothing: that is done by the movement-analysis algorithms. It comes in afterwards, to do what those algorithms do poorly: look at the images the way a clinician would, and write a clear report from the numbers.

Observe

Visual review of the test

From a few key frames of the video, the AI describes what can be seen: whether there is a walking aid, whether the patient reaches for support, whether the hands are used to stand up or sit down, whether the feet shuffle, what the posture looks like. When something is not visible, it says so.

Write

A clinical report in English

With the measurements and the visual review, the AI drafts a clear narrative, with cautious clinical references and a limitations section. It always separates what was measured, what was observed and what is interpretation. It makes no diagnoses.

Stays on your computerThe original video, the patient's identity, the video with the detected movement and the final PDF.
Shared for the reportThe measurements and, if you choose, a few key frames of the test. No patient name and no full video. Sending frames can be switched off.
Comes back to youThe observations and the report text, ready to review in the application before export.
Numbers are always measuredThe AI never invents or computes values. Every number in the report comes from the movement analysis and can be traced back to its source.
OptionalThe full analysis works without AI. The assisted report is switched on when you want it, and can be switched off at any time.
The clinician has the last wordThe text is a proposal. It is reviewed and edited in the application by whoever signs the report.
Project status

Software in development, in pre-validation for clinical studies.

TUGscope is not yet a certified medical device and must not be used for clinical decisions. The prototype works end to end and is ready to be compared with the reference assessment in clinical and hospital settings.

  • Agreement and test–retest reliability studies in geriatrics, physical and rehabilitation medicine, neurology and orthopaedics.
  • Standardised recording protocols (tripod, side view, 3 m mark) and collection of videos with informed consent.
  • Collaboration with physiotherapists and geriatricians to review the clinical report and the references used in its interpretation.

Clinical and academic partners

If you work in a hospital, a long-term care unit, a teaching institution or a research group and would like to take part in the validation, get in touch.

[email protected]

Diogo Pinto, Geridoc. We reply to every message.